EN
- Overview
- Recommended Products
AISG Cable Assembly
Where marked “L” see paragraph 6 for assembly length in metres.
3. Variations
Variations on the D-sub connector are used depending on OEM interconnect. Variation 1 (RETD/) uses
a rectangular formed o-ring to create the IP67 seal, which seals directly against the mating half.
Variation 2 (RETK/) uses a skirt to create the IP67 seal to allow for a raised mating half.
4. Components
4.1 Cable type
1 x Twisted Pair 0.25mm², 2 x Power Cores and 1 Ground Core 0.75mm². Outer sheath in black PUR
with overall diameter 8mm. Halogen free, flame retardant and UV stable.
4.2 Connector Style
8 Pin female connector according to IEC 60130-9 to 9 way D Sub waterproof male connector. Fully
soldered contacts. All connectors are UL94V-0.
5. Specification of Terminated RETD/ or RETK/ assemblies
Rated Current 5A
Temperature Range -40°C to +80°C
Protection Class IP67 mated
Overall Cable Diameter 8mm
Minimum Bending Radius 60mm (single) 120mm (repeat)
Flammability Halogen Free, Flame Retardant
Relative Humidity Up to 100% Remote Electrical Tilt (RET)
Multiwire Power Supply and Control Cable
This AISG multiwire cable is used to connect the Remote Radio Unit with the Remote Control Unit and
to transmit the base station signals for controlling the RET antenna and offers protection to IP67.
| AISG cable |
| AISG female to male |
| AISG connector |
