| Electrical |
| Impedance |
50 Ω |
| Frequency Range |
0 - 11 GHz |
| Voltage Rating |
1,500 volts peak |
| VSWR |
MIL-C-39012 straight connectors: 1.3 max 0-11 GHz
MIL-C-39012 right angle connectors: 1.35 max 0-11 GHz
|
| Dielectric Withstanding Voltage |
2,500 volts rms |
| Insulation Resistance |
5,000 MΩ minimum |
| Center Contact Resistance |
1.0 mΩ |
| Outer Contact Resistance |
0.2 mΩ |
| RF Leakage |
-90 dB minimum at 3 GHz |
| Insertion Loss |
.15 dB maximum at 10 GHz |
| Mechanical |
| Mating |
5/8-24 threaded coupling |
| Braid or Jacket Cable Affixment |
All crimps: hex braid crimp
Clamps: screw-thread nut and braid clamp
|
| Center Conductor Cable Affixment |
Crimp: crimp or solder
All others: solder only
|
| Captivated Contact |
All crimps unless specified otherwise |
| Cable Retention |
Crimps: 60-120 lbs
Clamps: 30-70 lbs
|
| Material |
| Male Contacts |
Brass, silver or gold plated |
| Female Contacts |
Phosphorous bronze or beryllium copper, silver or gold plated |
| Other Metal Parts |
Brass with ASTROplate® finish; M39012 has silver finish |
| Insulators |
TFE, copolymer of styrene or glass-TFE (hermetic seal) |
| Weatherproof Gaskets |
Silicone rubber of synthetic rubber |
| Crimp Ferrule |
Copper |
| Environmental |
| Temperature Range |
TFE: -65°C to +165°C |
| Weatherproof |
All series N with gaskets are weatherproof |
| Hermetic Seals |
Pass helium leak test of 2x10-8 cc/sec |
| Pressurized Shock |
Compression seal MIL-STD-202, method 213 |
| Vibration |
MIL-STD-202, method 204, test condition B |
| Moisture Resistance |
MIL-STD-202, method 106 |
| Corrosion |
MIL-STD-202, method 101, test condition B |
| Temperature Cycling |
MIL-STD-202, method 102, test condition C |
| Altitude |
MIL-STD-202, method 105, test condition C |
| Military |
MIL-C-39012
MIL-A-55339
|
Where applicable |
EN
