EN
- Overview
- Recommended Products
Specifications
1.Body:Brass/Nickel Plated
2.Insulators: PTFE
3.Certification: RoHS/ISO9001:2008
4.Frequency range:0-11 GHz
50ohm Male Crimp Type TNC Connector
Features & Benefits
| • | Threaded coupling interface ensures connector will not de-couple in vibration-intensive applications |
| • | Many TNCs are recognized under the component program of Underwriter's Laboratories and have undergone stringent testing from an independent laboratory |
| • | Performance from 0 - 11 GHz operations in many applications |
Applications
| • | Antennas | • | Base Stations | • | Cable Assembly |
| • | Cellular | • | Components | • | Instrumentation |
| • | Mil-Aero | • | Networks | • | Radar |
| • | Telecom |
50ohm TNC Specifications
| Electrical | |
| Impedance | 50 Ω |
| Frequency Range | 0 - 11 GHz |
| Voltage Rating | 500 volts peak |
| Dielectric Withstanding Voltage | 1,500 volts rms |
| VSWR | M39012 straight connectors: 1.3 max @ 0 - 11 GHzM39012 right angle connectors: 1.35 max @ 0 - 11 GHz |
| Contact Resistance | Center: contact 1.5 mΩOuter contact: 0.2 mΩ |
| Braid to Body | 0.1 mΩ |
| RF Leakage | -60 dB minimum @ 3 GHz |
| Insertion Loss | 0.18 dB @ 9 GHz |
| Insulation Resistance | = 5,000 MΩ |
| Mechanical | |
| Mating | 7/16 threaded coupling |
| Braid/Jacket Cable Affixment | Crimps: hex braid crimp Clamps: screw-thread nut and braid clamp |
| Center Conductor Cable Affixment | Crimps: crimp or solder All others: solder only |
| Captivated Contact | All crimps unless specified otherwise |
| Cable Retention | Crimps: 20 - 100 lbs Clamps: 20 - 50 lbs |
| Material | |
| Male Center Contacts | Brass, silver or gold plated |
| Female Center Contact | Beryllium copper or phosphorous bronze, silver or gold plated |
| Other Metal Parts | Brass with nickel finish (except for M39012 which are silver) |
| Insulators | TFE, Delrin |
| Clamp Gaskets | Synthetic rubber, silicone rubber |
| Crimp Ferrule | Copper |
| Environmental | |
| Temperature Range | -65°C to +165°C |
| Weatherproof | Clamps with clamp gaskets, Crimps with heat-shrink tubing |
| Hermetic Seals | Pass helium leak test of 2x10-8 cc/sec |
| Shock | MIL-STD-202, method 202 |
| Vibration | MIL-STD-202, method 204, test condition D |
| Moisture Resistance | MIL-STD-202, method 106 |
| Corrosion | MIL-STD-202, method 101, test condition B |
| Temperature Cycling | MIL-STD-202, method 102, test condition D |
| Altitude | MIL-STD-202, method 105, test condition C |
Note: These characteristics are typical but may not apply to all connectors.
